Contract Address Details

0x78B745b71cd53347335BEC9A2601703AcF689162

Token
Wrapped AllianceBlock Token (WALBT)
Creator
0x8e442e–7a463c at 0x61300d–8a2acd
Balance
0 EWT ( )
Tokens
Fetching tokens...
Transactions
245 Transactions
Transfers
0 Transfers
Gas Used
8,418,948
Last Balance Update
29146703
Contract name:
WrappedToken




Optimization enabled
true
Compiler version
v0.7.6+commit.7338295f




Optimization runs
200
EVM Version
default




Verified at
2023-01-27T22:40:03.934137Z

Constructor Arguments

000000000000000000000000000000000000000000000000000000000000006000000000000000000000000000000000000000000000000000000000000000a00000000000000000000000000000000000000000000000000000000000000012000000000000000000000000000000000000000000000000000000000000001b5772617070656420416c6c69616e6365426c6f636b20546f6b656e0000000000000000000000000000000000000000000000000000000000000000000000000557414c4254000000000000000000000000000000000000000000000000000000

Arg [0] (string) : Wrapped AllianceBlock Token
Arg [1] (string) : WALBT
Arg [2] (uint8) : 18

              

Contract source code

// Sources flattened with hardhat v2.12.6 https://hardhat.org

// File @openzeppelin/contracts/utils/[email protected]

// SPDX-License-Identifier: Unlicense

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}


// File @openzeppelin/contracts/access/[email protected]

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}


// File @openzeppelin/contracts/math/[email protected]

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}


// File @openzeppelin/contracts/token/ERC20/[email protected]

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


// File @openzeppelin/contracts/token/ERC20/[email protected]

pragma solidity >=0.6.0 <0.8.0;



/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}


// File @openzeppelin/contracts/utils/[email protected]

pragma solidity >=0.6.0 <0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 * Since it is not possible to overflow a 256 bit integer with increments of one, `increment` can skip the {SafeMath}
 * overflow check, thereby saving gas. This does assume however correct usage, in that the underlying `_value` is never
 * directly accessed.
 */
library Counters {
    using SafeMath for uint256;

    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        // The {SafeMath} overflow check can be skipped here, see the comment at the top
        counter._value += 1;
    }

    function decrement(Counter storage counter) internal {
        counter._value = counter._value.sub(1);
    }
}


// File @openzeppelin/contracts/utils/[email protected]

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}


// File contracts/interfaces/IERC2612Permit.sol

pragma solidity 0.7.6;

/**
 * @dev Interface of the ERC2612 standard as defined in the EIP.
 *
 * Adds the {permit} method, which can be used to change one's
 * {IERC20-allowance} without having to send a transaction, by signing a
 * message. This allows users to spend tokens without having to hold Ether.
 *
 * See https://eips.ethereum.org/EIPS/eip-2612.
 */
interface IERC2612Permit {
    /**
     * @dev Sets `_amount` as the allowance of `_spender` over `_owner`'s tokens,
     * given `_owner`'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `_owner` cannot be the zero address.
     * - `_spender` cannot be the zero address.
     * - `_deadline` must be a timestamp in the future.
     * - `_v`, `_r` and `_s` must be a valid `secp256k1` signature from `_owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``_owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address _owner,
        address _spender,
        uint256 _amount,
        uint256 _deadline,
        uint8 _v,
        bytes32 _r,
        bytes32 _s
    ) external;

    /**
     * @dev Returns the current ERC2612 nonce for `_owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``_owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address _owner) external view returns (uint256);
}


// File contracts/ERC20Permit.sol


pragma solidity 0.7.6;


/**
 * @dev Extension of {ERC20} that allows token holders to use their tokens
 * without sending any transactions by setting {IERC20-allowance} with a
 * signature using the {permit} method, and then spend them via
 * {IERC20-transferFrom}.
 *
 * The {permit} signature mechanism conforms to the {IERC2612Permit} interface.
 */
abstract contract ERC20Permit is ERC20, IERC2612Permit {
    using Counters for Counters.Counter;

    mapping(address => Counters.Counter) private _nonces;

    // Mapping of ChainID to domain separators. This is a very gas efficient way
    // to not recalculate the domain separator on every call, while still
    // automatically detecting ChainID changes.
    mapping(uint256 => bytes32) public domainSeparators;

    constructor() {
        _updateDomainSeparator();
    }

    /**
     * @dev See {IERC2612Permit-permit}.
     *
     * If https://eips.ethereum.org/EIPS/eip-1344[ChainID] ever changes, the
     * EIP712 Domain Separator is automatically recalculated.
     */
    function permit(
        address _owner,
        address _spender,
        uint256 _amount,
        uint256 _deadline,
        uint8 _v,
        bytes32 _r,
        bytes32 _s
    ) public virtual override {
        require(block.timestamp <= _deadline, "ERC20Permit: expired _deadline");

        // Assembly for more efficiently computing:
        // bytes32 hashStruct = keccak256(
        //     abi.encode(
        //         _PERMIT_TYPEHASH,
        //         _owner,
        //         _spender,
        //         _amount,
        //         nonces[_owner].current(),
        //         _deadline
        //     )
        // );

        bytes32 hashStruct;
        Counters.Counter storage nonceCounter = _nonces[_owner];
        uint256 nonce = nonceCounter.current();

        assembly {
            // Load free memory pointer
            let memPtr := mload(64)

            // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")
            mstore(memPtr, 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9)
            mstore(add(memPtr, 32), _owner)
            mstore(add(memPtr, 64), _spender)
            mstore(add(memPtr, 96), _amount)
            mstore(add(memPtr, 128), nonce)
            mstore(add(memPtr, 160), _deadline)

            hashStruct := keccak256(memPtr, 192)
        }

        bytes32 eip712DomainHash = _domainSeparator();

        // Assembly for more efficient computing:
        // bytes32 hash = keccak256(
        //     abi.encodePacked(uint16(0x1901), eip712DomainHash, hashStruct)
        // );

        bytes32 hash;

        assembly {
            // Load free memory pointer
            let memPtr := mload(64)

            mstore(memPtr, 0x1901000000000000000000000000000000000000000000000000000000000000)  // EIP191 header
            mstore(add(memPtr, 2), eip712DomainHash)                                            // EIP712 domain hash
            mstore(add(memPtr, 34), hashStruct)                                                 // Hash of struct

            hash := keccak256(memPtr, 66)
        }

        address signer = _recover(hash, _v, _r, _s);

        require(signer == _owner, "ERC20Permit: invalid signature");

        nonceCounter.increment();
        _approve(_owner, _spender, _amount);
    }

    /**
     * @dev See {IERC2612Permit-nonces}.
     */
    function nonces(address _owner) public override view returns (uint256) {
        return _nonces[_owner].current();
    }

    function _updateDomainSeparator() private returns (bytes32) {
        uint256 chainID = _chainID();

        // no need for assembly, running very rarely
        bytes32 newDomainSeparator = keccak256(
            abi.encode(
                keccak256(
                    "EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
                ),
                keccak256(bytes(name())), // ERC-20 Name
                keccak256(bytes("1")),    // Version
                chainID,
                address(this)
            )
        );

        domainSeparators[chainID] = newDomainSeparator;

        return newDomainSeparator;
    }

    // Returns the domain separator, updating it if chainID changes
    function _domainSeparator() private returns (bytes32) {
        bytes32 domainSeparator = domainSeparators[_chainID()];

        if (domainSeparator != 0x00) {
            return domainSeparator;
        }

        return _updateDomainSeparator();
    }

    function _chainID() private pure returns (uint256) {
        uint256 chainID;
        assembly {
            chainID := chainid()
        }

        return chainID;
    }

    function _recover(
        bytes32 _hash,
        uint8 _v,
        bytes32 _r,
        bytes32 _s
    ) internal pure returns (address) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (
            uint256(_s) >
            0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0
        ) {
            revert("ECDSA: invalid signature '_s' value");
        }

        if (_v != 27 && _v != 28) {
            revert("ECDSA: invalid signature '_v' value");
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(_hash, _v, _r, _s);
        require(signer != address(0), "ECDSA: invalid signature");

        return signer;
    }
}


// File contracts/WrappedToken.sol

pragma solidity 0.7.6;



contract WrappedToken is ERC20Permit, Pausable, Ownable {
    using SafeMath for uint256;
    /**
     *  @notice Construct a new WrappedToken contract
     *  @param _tokenName The EIP-20 token name
     *  @param _tokenSymbol The EIP-20 token symbol
     */
    constructor(
        string memory _tokenName,
        string memory _tokenSymbol,
        uint8 decimals
    ) ERC20(_tokenName, _tokenSymbol) {
        super._setupDecimals(decimals);
    }

    /**
     * @notice Mints `_amount` of tokens to the `_account` address
     * @param _account The address to which the tokens will be minted
     * @param _amount The _amount to be minted
     */
    function mint(address _account, uint256 _amount) public onlyOwner {
        super._mint(_account, _amount);
    }

    /**
     * @notice Burns `_amount` of tokens from the `_account` address
     * @param _account The address from which the tokens will be burned
     * @param _amount The _amount to be burned
     */
    function burnFrom(address _account, uint256 _amount)
        public
        onlyOwner
    {
        uint256 decreasedAllowance =
            allowance(_account, _msgSender()).sub(
                _amount,
                "ERC20: burn amount exceeds allowance"
            );

        _approve(_account, _msgSender(), decreasedAllowance);
        _burn(_account, _amount);
    }

    /// @notice Pauses the contract
    function pause() public onlyOwner {
        super._pause();
    }

    /// @notice Unpauses the contract
    function unpause() public onlyOwner {
        super._unpause();
    }

    function _beforeTokenTransfer(address from, address to, uint256 _amount) internal virtual override {
        super._beforeTokenTransfer(from, to, _amount);

        require(!paused(), "WrappedToken: token transfer while paused");
    }
}
        

Contract ABI

[{"type":"constructor","stateMutability":"nonpayable","inputs":[{"type":"string","name":"_tokenName","internalType":"string"},{"type":"string","name":"_tokenSymbol","internalType":"string"},{"type":"uint8","name":"decimals","internalType":"uint8"}]},{"type":"event","name":"Approval","inputs":[{"type":"address","name":"owner","internalType":"address","indexed":true},{"type":"address","name":"spender","internalType":"address","indexed":true},{"type":"uint256","name":"value","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"OwnershipTransferred","inputs":[{"type":"address","name":"previousOwner","internalType":"address","indexed":true},{"type":"address","name":"newOwner","internalType":"address","indexed":true}],"anonymous":false},{"type":"event","name":"Paused","inputs":[{"type":"address","name":"account","internalType":"address","indexed":false}],"anonymous":false},{"type":"event","name":"Transfer","inputs":[{"type":"address","name":"from","internalType":"address","indexed":true},{"type":"address","name":"to","internalType":"address","indexed":true},{"type":"uint256","name":"value","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"Unpaused","inputs":[{"type":"address","name":"account","internalType":"address","indexed":false}],"anonymous":false},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"allowance","inputs":[{"type":"address","name":"owner","internalType":"address"},{"type":"address","name":"spender","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"approve","inputs":[{"type":"address","name":"spender","internalType":"address"},{"type":"uint256","name":"amount","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"balanceOf","inputs":[{"type":"address","name":"account","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"burnFrom","inputs":[{"type":"address","name":"_account","internalType":"address"},{"type":"uint256","name":"_amount","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint8","name":"","internalType":"uint8"}],"name":"decimals","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"decreaseAllowance","inputs":[{"type":"address","name":"spender","internalType":"address"},{"type":"uint256","name":"subtractedValue","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"bytes32","name":"","internalType":"bytes32"}],"name":"domainSeparators","inputs":[{"type":"uint256","name":"","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"increaseAllowance","inputs":[{"type":"address","name":"spender","internalType":"address"},{"type":"uint256","name":"addedValue","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"mint","inputs":[{"type":"address","name":"_account","internalType":"address"},{"type":"uint256","name":"_amount","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"string","name":"","internalType":"string"}],"name":"name","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"nonces","inputs":[{"type":"address","name":"_owner","internalType":"address"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"owner","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"pause","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"paused","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"permit","inputs":[{"type":"address","name":"_owner","internalType":"address"},{"type":"address","name":"_spender","internalType":"address"},{"type":"uint256","name":"_amount","internalType":"uint256"},{"type":"uint256","name":"_deadline","internalType":"uint256"},{"type":"uint8","name":"_v","internalType":"uint8"},{"type":"bytes32","name":"_r","internalType":"bytes32"},{"type":"bytes32","name":"_s","internalType":"bytes32"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"renounceOwnership","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"string","name":"","internalType":"string"}],"name":"symbol","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"totalSupply","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"transfer","inputs":[{"type":"address","name":"recipient","internalType":"address"},{"type":"uint256","name":"amount","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[{"type":"bool","name":"","internalType":"bool"}],"name":"transferFrom","inputs":[{"type":"address","name":"sender","internalType":"address"},{"type":"address","name":"recipient","internalType":"address"},{"type":"uint256","name":"amount","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"transferOwnership","inputs":[{"type":"address","name":"newOwner","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"unpause","inputs":[]}]
            

Deployed ByteCode

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